 Lister-Petter Powered Marine Generator Sets
|
 SeaHawk generator sets are engineered
for top performance in marine environments. And of course Lister-Petter name stands for reliability. They feature the LPW Series Lister-Petter liquid-cooled diesel engines. The LPW
Series used in SeaHawk generator sets are vertical cylinder, 4 cycle, direct injection marine auxiliary engines with hydraulic valve lifters to reduce noise. The cooling
system is thermostatically controlled fresh water with a heat exchanger, using a fresh water circulating pump with integral thermostat and separate sea water pump.
Specification Summary:
Model |
Cylinders |
Displacement (CDI) |
Output (60 Hz) |
1PH, 1.0PF |
3PH, 0.8PF |
LPW2 |
2 |
56.75 |
7.5 Kw |
7.5 Kw |
LPW3 |
3 |
85.13 |
11.5 Kw |
12.p Kw |
LPW4 |
4 |
113.50 |
15 Kw |
16.0 Kw |
Output at 85 degrees F ambient air temperature, for continuous duty, derate by 10% |
|
Standard Equipment:
- Anti-vibration engine generator support mounting
- Drip pan/set mounting for clip retention
- Fuel filter
- Fuel lift pump
- Engine hour meter
- Engine protection switches and shutdown solenoid
- Lifting eye
- Spin-on oil lubrication filter
- 12V electric start with battery charging alternator
- 3 Way Control Panel with rotary start/stop switch and hour meter
- Failure lights for low oil pressure, high water temperature, and battery charging failure
- Sump Drain Valve
- Water injected exhaust elbow
|
Alternator data:
- 4 pole, rotating Field
- Drip-proof construction
- Brushless with single bearing
- Voltage regulation +/-2%
- Class H insulation (conforms to NEMA, MGI - 22.40)
- Single phase is 12 wire, 120/240 volt
- Three phase is 12 wire reconnectable
|
Accessories:
- Remote gauge panel with oil pressure and water temperature guage
- On-board spares
- Belt guard
- Dry exhaust flange (excluding LPW4)
|
Generator Set Data
- Maximum angle of operation 20 degrees any direction
- Frequency regulation 5% no load to full load
- 50 Hz available
|
