Browse Products
HawkpowerProducts
Hawkpower Diesel Gensets
Hawkpower Gaseous Gensets
Hawkpower Rental Gensets
 
Standard Features and Controls
Dimensional Specifications
Genset Options
 
 
 MasterCard American Express Card Visa Card
Call maesco.com today!
 Tel:
(800) 257-8133
(856) 829-7798
 Fax:
(800) 470-4779
(856) 829-2776
 email maesco.com
 
Email this web site to a friend! 

Hawkpower

All Hawkpower Generator Sets feature “The Hawkpower® Design,” which includes:

  • A close-coupled 4 pole brushless alternator featuring a single bearing, rotating field, self-excited and drip-proof design
  • The alternator is solid state automatic voltage regulator (AVR) controlled
  • The combined unit is mounted on a structural steel base with anti-vibration isolators
  • Liquid-cooled units are equipped with a tropical capacity radiator mounted in a metal cowl attached to the base frame and a pusher fan
  • All units include a 12 V electric starter with belt driven battery charge alternator including battery cables and hold-down
  • A fuel control solenoid is included - energized to run
  • Also standard are the air cleaner, engine-mounted exhaust silencer, fan and belt guard, and fuel lift pump
  • The smaller units are equipped with integral base-mounted fuel tanks with fuel level gauges as standard equipment; optional single or dual wall, UL-listed, sub-base fuel tanks in various capacities are available on all models
  • A line circuit breaker is standard on all units under 50 kW
  • Included is the basic electric start control panel; optional panels are available as listed below

 


Control Panels

ES - Basic Electric Start:  

  • a 3-wire logic system
  • running time meter
  • 3 position momentary rocker switch with start/stop positions
  • manual starter disconnect
  • run lamp indicator
  • low oil pressure & high-engine coolant temperature safety shutdown

Options for ES Control Panel:

  • Analog DC gauge package that includes oil pressure, engine coolant temperature and battery voltage
  • Analog AC meter package that includes a voltmeter, two AC ammeters and a frequency meter

BD - Basic Digital Autostart:

  • two-wire logic system that initiates the starting sequence from an open to close signal supplied from an auto transfer switch or other auto-start input
  • running time meter
  • 3-position rocker switch with run/off/auto positions
  • automatic starter disconnect
  • low oil pressure and high-engine coolant temperature safety shutdowns

Options for BD Control Panel:

  • Analog DC gauge package that includes oil pressure, engine coolant temperature and battery voltage
  • Analog AC meter package that includes a voltmeter, two AC ammeters and a frequency meter

DS - Digital Autostart with LCD:

  • two-wire digital logic that initiates the starting sequence from an open to close signal supplied from an auto transfer switch or other auto-start input
  • 3-position toggle switch with run/off/auto positions
  • off position is a true off, no power system
  • LCD display of oil pressure, engine coolant temperature and battery voltage
  • pre-alarm light and LCD display will warn the operator of potential problem before the unit shuts down
  • failure light and LCD display will indicate the reason of shutdown
  • running time information is collected and can be displayed with the momentary toggle switch

Options for DS Control Panel:

  • AC meter package that includes an LCD digital display of AC volts, AC amps, AC phase and AC frequency
  • Remote annunciator with LCD display and audible alarm
  • Communications package.
  • NFPA 110 Configuration.